

New Catalyst Modified with Nanosize Molybdenum Carbides for Hydroisomerization of n-Alkane, its Catalytic Behavior in the Process of Hydroisomerization of Diesel Fractions. Part 3. Comparison of Catalytic Properties of Bifunctional Catalysts Based on SAPO
https://doi.org/10.18412/1816-0387-2017-4-304-308
Abstract
Part 3 of the studies dealt with catalytic properties of the new catalysts based on molylbdenum carbides, resistant to sulfur compounds and providing manufacturing of low pour point diesel fuel with the quality indices identical to those obtained with platinum-containing catalysts. Catalytic properties of bifunctional catalysts 7%Mo2C/SAPO-31 (LCCH-2) and 7%Mo2C/SAPO-11 (LCCH-2-2) for hydroisomerization of diesel fractions were compared at the temperature range between 320 and 400 °C. It was shown that at above 320 °C the catalyst LCCH-2, against LCCCH-2-2, provided the formation of the hydroisomerized diesel fraction at a higher yield and freezing at a lower temperature. Inspection of the data on the ratio of total quantities of monomers and diisomers in the reaction products led to conclude that the former catalyst is more selective than the latter to the formation of terminal monosubstituted alkanes. Studies of the stability of both catalysts to deactivation with coke deposits (100 hour testing at 320 and 360 °C during hydroisomerization) revealed that LCCH-2-2 is less stable to deactivation than LCCH-2. The observed regularities were accounted for by differences in the acidities, degree of homogeneity of distribution of acid and hydrating-dehydrating centers through the catalysts under study, and types of structures of the acid support.
About the Authors
G. V. EchevskiiRussian Federation
A. V. Toktarev
Russian Federation
D. G. Aksenov
Russian Federation
E. G. Kodenev
Russian Federation
References
1. Parlitz B., Schreier E., Zubowa H.L., Eckelt R., Lieske E., Lischke G., Fricke R. // J. Catal. 155 (1995) 1-11.
2. Campelo J.M., Lafont F., Marinas J.M. // Appl. Catal. A: General. 170 (1998) 139-144.
3. Geng C.-H., Zhang F., Gao Z.-X., Zhao L.-F., Zhou J.-L. // Catal. Today. 93 (2004) 485-491.
4. Campelo J.M., Lafont F., Marinas J.M. // J. Catal. 156 (1995) 11-18.
5. Campelo J.M., Lafont F., Marinas J.M. // J. Chem. Soc. Faraday Trans. 91 (1995) 1551-1555.
6. Campelo J.M., Lafont F., Marinas J.M. // Appl. Catal. A: General. 152 (1997) 53-62.
7. Sinha A.K., Sivasanker S. // Catal. Today. 49 (1999) 293-302.
8. Sinha A.K., Sivasanker S., Ratnasamy P. // Ind. Eng. Chem. Res. 37 (1998) 2208-2214.
9. First E.L., Gounaris C.E., Wei J., Floudas C.A. // Phys. Chem. Chem. Phys., 2011, 13, 17339-17358.
10. Martens J.A., Souverijns W., Verrelst W., Parton R., Froment G.F., Jacobs P.A. // Angew. Chem. Int. Engl. 34 (1995) 2528-2530.
11. Martens J.A., Jacobs P.A. // Zeolites. 6 (1986) 334-348.
12. Ечевский Г.В., Токтарев А.В., Аксенов Д.Г., Коденев Е.Г. // Катализ в промышленности. 2017. Т. 17. № 3, С. 236—242.
Review
For citations:
Echevskii G.V., Toktarev A.V., Aksenov D.G., Kodenev E.G. New Catalyst Modified with Nanosize Molybdenum Carbides for Hydroisomerization of n-Alkane, its Catalytic Behavior in the Process of Hydroisomerization of Diesel Fractions. Part 3. Comparison of Catalytic Properties of Bifunctional Catalysts Based on SAPO. Kataliz v promyshlennosti. 2017;17(4):304-308. (In Russ.) https://doi.org/10.18412/1816-0387-2017-4-304-308