Preview

Kataliz v promyshlennosti

Advanced search
Open Access Open Access  Restricted Access Subscription or Fee Access

The influence of the support nature and synthetic conditions on the structure-phase features and properties of the thermostable catalyst for dehydrogenation of cyclohexanol

https://doi.org/10.18412/1816-0387-2019-5-382-390

Abstract

The reported data relate to the influence of the nature of the aluminosilica support and of the temperature of its treatment with the ammoniaccarbonate solution containing ammoniac-carbonate complex of copper on the specific surface area, chemical and phase composition of the precursor of the active component and on the properties of copper-containing catalyst for dedhydrogenation of cyclohexanol. Elevation of the treatment temperature of amorphous silica (white carbon) with the ammoniac-carbonate solution results in an increase in the proportion of the chemically anchored precursor up to its complete bonding to the support to form the immobilized phase. A higher thermostability of the catalyst supported on white carbon with boehmite compared to the catalysts supported on pyrogenous silica is demonstrated.

About the Authors

V. I. Vanchurin
D. Mendeleev University of Chemical Technology of Russia, Moscow
Russian Federation


O. I. Karachenko
JSC Grodno Azot, Grodno
Russian Federation


T. V. Konkova
D. Mendeleev University of Chemical Technology of Russia, Moscow
Russian Federation


M. B. Alekhina
D. Mendeleev University of Chemical Technology of Russia, Moscow
Russian Federation


References

1. Щанкина В.Г., Шаркина В.И., Боевская Е.А., Мельникова Т.И., Серегина Л.К., Меньшиков В.В. // Вестник МИТХТ, Химия и технология неорганических материалов. 2013. Т. 8. № 2. С. 79—85.

2. Комова З.В., Зрелова И.П., Вейнбендер А.Я., Шкитина В.И., Крендель А.И., Шаркина В.И., Боевская Е.А. // Катализ в промышленности. 2007. № 5. С. 43—51.

3. Пат. РФ 2353425; опубл. 27.04.2009, Бюл. № 12.

4. Пат. РФ 2218987; опубл. 20.12.2003, Бюл. № 35.

5. Патент РФ 2241540; опубл. 10.12.2004, Бюл. № 34.

6. Ванчурин В.И., Павлов Ю.Л., Петров А.Ю., Марачук Л.И., Караченко О.И., Дульнев А.В., Рудник Л.Д. // Катализ в промышленности. 2016. № 2. С. 41—47.

7. Ванчурин В.И., Караченко О.И., Петров А.Ю. Таракановский И.В., Джумамухамедов Д.Ш., Павлов Ю.Л., Дульнев А.В. // Катализ в промышленности. 2018. № 5. С. 63—69.

8. Коробочкин В.В., Усольцева Н.В., Балмашнов М.А. // Известия Томского политехнического университета. 2012. Т. 321. № 3. С. 59—63.

9. Лыгин В.И. Модели «жесткой» и «мягкой» поверхности. Конструирование микроструктуры поверхности кремнеземов // Рос. хим. ж. (Ж. Рос. хим. об-ва им. Д.И. Менделеева), 2002. Т. XLVI. № 3. С. 12—18.

10. Чукин Г.Д. Строение оксида алюминия и катализаторов гидрообессеривания. Механизмы реакций. М.: Типография Паладин, ООО «Принта», 2010. 288 с.

11. Ванчурин В.И., Джумамухамедов Д.Ш., Попова Н.А. // Стекло и керамика. 2014. № 11. C. 32—36.


Review

For citations:


Vanchurin V.I., Karachenko O.I., Konkova T.V., Alekhina M.B. The influence of the support nature and synthetic conditions on the structure-phase features and properties of the thermostable catalyst for dehydrogenation of cyclohexanol. Kataliz v promyshlennosti. 2019;19(5):382-390. (In Russ.) https://doi.org/10.18412/1816-0387-2019-5-382-390

Views: 546


ISSN 1816-0387 (Print)
ISSN 2413-6476 (Online)